单面主机 LUM-270
Single facer
★结构特点:Structural features:
*采用真空吸附式导纸,配备高压强力风机。设有风量调节装置机吸风消音装置;电气控制集中于同一电柜距离主机不小于1.5米,操作侧全封闭侧罩。
Apply the vacuum adsorption leading paper, equipped with high-pressure powerful fan. Equipped with air conditioning
machine air suction device; and censored The electrical control focused on the same electric ark distance not less than 1.5 meters, host operating side closed side cover
*万向节传动,分体结构独立驱动箱。封闭式齿轮传动寖油润滑,可延长齿轮的使用寿命。Gimbal transmission, the body structure independent driver box. Enclosed gear transmission oil lubrication, can prolong the service life of gear.
*涂胶辊和定胶辊设计为成组导轨滑移,拆装方便快捷。
Glue-coating roller and fixed rubber roller design for group guide sliding, disassembling conveniently.
*机座及墙板铸铁结构,墙板厚度为130mm。
Base and wallboard cast iron structure, wallboard thickness for 180mm.
*瓦楞辊采用52CrMo**合金钢,经调质、淬火、表面磨光,瓦楞辊直径Ø270mm,表面硬度为HRC60度以上;瓦楞辊采用气缸控制上下位移。
Corrugated roller adopts 52CrMo high quality alloy steel, via piece.modified, quenching, surface polishing, corrugated roller diameter Ø 270mm, surface hardness for HRC60 degrees, Corrugated roller adopt cylinder controlled fluctuation displacement
*压力辊直径Ø270mm,表面消磨加工并镀铬处理;气缸控制上下位移,材质为中碳钢45号、调制处理。
Pressure roller diameter Ø 320mm, surface treatment processing and kill chromium plating, Cylinder controlled fluctuation, material for medium-carbon steel displacement 45, modulation handle.
*预热滚直径Ø215mm,表面消磨加工并镀硬铬处理,全部用金属软管连接。
Pressure roller diameter Ø 215mm, surface treatment processing and kill chromium plating, Cylinder controlled fluctuation,
material for medium-carbon steel displacement 45, modulation handle.
*瓦楞辊与压力辊轴承采用耐高温润滑脂润滑轴承。
Corrugated roller and pressure roller bearings use high-temperature grease lubricated bearing.
*气动控制给胶退胶,涂胶辊直径Ø215mm,表面磨光后刻有凹坑式网纹 镀硬铬处理,调胶辊表面消磨加工并镀硬铬处理。
Pneumatic control to glue back glue, glue roller diameter Ø 240mm, surface polishing after engraved with hard chromium plating pit type anilox roll surface treatment, adjustable glue hard chromium plating kill processing and handling.
*采用电动隔浆装置,涂糊部在主机停止时仍可独立运转,防止浆糊干涸(可选装)。
Using electric isolation plasma devices, besmear paste sections in the host stops can still operate independently, prevent paste dry (option).
*瓦楞辊单边中高0.10mm,压力辊单边中高0.075mm。加限位装置,压紧气缸为Ø160 mm气缸。
Corrugated roller unilateral high 0.10 mm, pressure roller unilateral 0.075 mm high. Add peneumatied device, pressure cylinder for Ø 1.6 mm cylinder
★技术参数:Technical parameters:
1.工作幅宽:1400mm。
2.work width:1400mm
2.设计速度:80米/分。
3.Design speed: 180 meters per minute.
3.操作方向:左手机或右手机(需根据客户厂房确定)。
operation direction: left or right (need according to customer"s plant sure).
4.气源:0.4—0.9Mpa。
Source: 0.4-0.9 Mpa.
5.蒸汽压力:0.8—1.3Mpa。
Steam pressure: 0.8-1.3 Mpa.
6.瓦楞楞型:(UV型或UVV型):根据客户需求定制。
7.(UV corrugated stare blankly type type or UVV type) : according to the customer demand customization
★辊类直径参数:Roller class diameter parameters:
1.瓦楞辊直径:Ø270 mm。
Corrugated roller diameter Ø270 mm。
2.压力辊直径:Ø270 mm。
pressure roller diameter: Ø 270 mm.
3.涂胶辊直径:Ø215 mm。
Glue-coating roller diameter: Ø 215mm.
4.预热辊直径:Ø215 mm。
Preheat roller diameter: Ø 215 mm.
★ 动力电机参数:Dynamic motor parameters:
① 主电机:7.5KW 380V 50HZ
The main motor7.5KW 380V 50HZ
② 吸风电机:11KW 380V 50HZ
Air suction motor11KW 380V 50HZ
规格 : 270 ;
售后服务 : 整机一年保修 ;
包装类型 : 箱 ;
适用对象 : 矿泉水、纯净水,酱类,护发用品,酒类饮料 ;
用途 : 生产纸板 ;
产品别名 : 单面机 ;
型号 : SF-270 ;
** : 精峰 ;
加工定制 : 是 ;