1、油墨特性:慢干,高光泽,附着力优异,颜色鲜艳。 2、适用材料:各种喷过UV光油的工件表面,某些电镀,五金件。 3、技术参数: 粘度:15000—3000CPS; 光泽:白色 50°、黑色、80° 、彩色 80°; 过网性:77T—180T 自干测试时间:48小时,烘干80摄氏度— 100摄氏度,烤半小时;放置24小时测试。 耐酒精:99%酒精1000g力来回**过不去35次(较少); **:1000g力来回**过25次(较少); 耐纸带:200g力来回35次(较少)。 4、稀释剂的选择: a.S—3慢干开油水,S—3A快干开油水 b.洗网水—718洗网 5、注意事项: a.使用前将油墨与固化剂搅拌均匀,用后随时封闭; b.根据需要须添加15%—20%固化剂(DUV-01) c.施工件在施工前*表面油渍及污物; d.需多色套印时应等**的颜色表干后进行套色; e.在作测试时应先让墨层*干燥 ; f.未经许可,不得将油墨与其它油墨混合及配色。 6、应急处理措施: a.如浸溅到眼部立即清水清洗,严重者就医。 b. 灭火急救措施:用干粉,泡沫*或沙子灭火。 ※备注:由于材料及使用中的变数,可能是结果会有变化,以上数据仅供参考,使用前请自行测试。1, ink characteristics: slow dry, high gloss, excellent adhesion, bright colors. 2, applicable materials: all kinds of sprayed UV light oil workpiece surface, some plating, metal parts. 3, technical parameters: Viscosity: 15000 - 3000CPS; Gloss: white 50 degrees, black, 80 degrees, color 80 degrees; Over the net: 77T - 180T Since the dry test time: 48 hours, drying at 80 degrees Celsius - 100 degrees Celsius, bake for half an hour; placed for 24 hours test. Resistant to alcohol: 99% alcohol 1000g force back and forth more than do not go to the least (35); Abrasion resistance: 1000g force back and forth more than 25 times (at least); Resistant tape: 200g force back and forth 35 times (at least). 4, diluent selection: A.S - 3 slow dry open water, S - 3A - Open Water B. wash net water - 718 washing nets 5, matters needing attention: A. before using the ink and curing agent mixing evenly, after use at any time to close; B. add 15% - 20% curing agent (DUV-01) as required C. construction in construction before the removal of surface grease and dirt; D. should wait in front of the multi-color color table dry after topping; E. should make the ink layer completely dry before testing; F. without permission, shall not be mixed with other ink ink and color matching. 6, emergency treatment measures: A., such as splash into the eyes immediately clean water, serious medical treatment. B. fire fighting first aid measures: dry powder, foam extinguisher or sand fire. Please note: due to the material and the use of variables that may be the result of a change, the above data for reference only, please test before use.
上海凯贤印刷科技有限公司是壹家以油墨生产.印刷耗材贸易.印刷加工为壹体的公司。凯贤科技公司座落在交通便利的嘉定安亭镇,紧靠F1**赛车场。公司占地面积10000平方米,是壹家以研制、生产**油墨为实体,同时经营各类相关辅助器材的科工贸壹体化大型企业。以ISO9001质量认证体系为基础,以欧美EN-71PART3、日本ST-MARK、美国ASTM检测体系为标准,生产适用於丝印、移印、胶印、喷涂等工艺系列油墨产品,为电子电器、纺织服装、日用制品、文体用品、包装印刷、广告展示、玩具业等国内外众多行业领域的着名**运营商提供**服务,备受着业界的信赖与推崇。凯贤科技在新时期确立了新的发展战略,提出了“科研先导,人才运营,整合资源,**经营”的企业经营方略。与国内外**油墨技术研究机构建立战略合作夥伴关系,在不断提高完善现有产品质量的同时,致力於新产品的研制开发。同时完善企业运营机制,积极吸纳各类人才,建立*、和谐、热忱、专注的顾问型服务团队,运用行之有效的营销、管理策略,增强了企业与客户的可持续发展动力与优势。 作为中国丝网印刷行业协的会单位和中国网印及制像协会的成员,凯贤科技深深感受到自己肩负着推动中国丝网印刷、制像事业走高速健康发展道路的历史使命。凯贤人决心籍着自身综合实力,结合各界有效资源,在:“良好、承诺”的企业****理念的指引下,坚持耕耘,壹直进步着,为创建“行业*壹**”而奋进!