Launch元征CNC-602A喷油嘴超声波清洗 机喷油嘴清洗机高压水流清洗 全部产品均为实物拍摄,所见即所得!厂家信誉!! 只做**!!杜绝伪劣!! CNC-602A喷油嘴CNC-602A喷油嘴清洗检测仪采用超声波清洗技与微处理器油压控制清洗检测技术相结合的一种机电一体化产品。该产品可模拟发动机的各种工况,对汽车的喷油嘴进行清洗、检测,同时还可对汽车喷油嘴及供油系统进行免拆清洗。 功能特点超声波清洗:可同时对多个喷油嘴进行超声波清洗,能***喷油嘴上的积炭。 均匀性/雾化性检测功能:检测各个喷油嘴喷油量的均匀性,同时可利用背景灯*仔细的观察喷油嘴的喷射雾化情况,还能对喷油嘴进行反向冲洗。 密封性测试功能:可检测喷油嘴在系统压力下的密封性和滴漏情况。 喷油量检测功能:可以检测喷油嘴在15秒常喷情况下的喷油量。 自动清洗检测功能:在特定的工况参数下,真实模拟喷油嘴在各种工况下的测试。 免拆清洗功能:带有多种免拆清洗接头,可进行多种车型免拆清洗维护(免拆配件为选配)。 采用超声波强力清洗技术,清洗能力强。 采用微机调压控制技术,油压稳定,可调范围宽,能适应装备各种汽油喷 射系统的汽车,并可实现喷油器清洗检测过程的自动化。 采用微机自动控制与数字显示技术,可对清洗、检测过程进行自动控制, 并对主要状态参数进行实时监控。 采用排油自动控制技术,在某些检测项目进行中可通过程序实现自动排 油,在检测结束后也可通过控制面板的按钮进行排油 技术参数 电源:AC220V±10% 50Hz/60Hz AC110V±10% 50Hz/60Hz 输入功率:250W 超声波清洗功率:100W 模拟检测转速范围:10~9990rpm 步长:10rpm 计时范围:1~9999秒 脉宽范围:0.5~25ms 步长:0.1ms 油箱容积:4700ml 外形尺寸:385mm×410mm×500mm 整机重量:约35kg CNC-602Aisan advanced electromechanical product, which can clean and testinjectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle FeatureUltrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush. Leakage test: To test the sealing and dribbling conditions of injectors under system pressure Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection Auto. test: To test injectors by simulating different working conditions On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle. Specification Power supply: □AC220V±10%, 50/60Hz;□AC110V±10%, 50/60Hz. Input power: 250W; Ultrasonic cleaner power: 100W; Simulated RPM range: 10~9990rpm; step: 10rpm; Time range: 1~9999sPulse width:0.5~25ms; step 0.1 ms;Fuel tank capacity: 4700ml;Dimensions: 385mm×410mm×500mm Weight: About 35kg 图片实拍 功率 : 100W ; ** : launch元征 ; 外形尺寸 : 385mm×410mm×500mm(cm) ; 工作方式 : 高压水流清洗 ; 清洗温度 : 30-80(℃) ; 超声清洗频率 : 100-800 ; 型号 : CNC-602A ; 槽数 : 6 ; 用途 : 商用 ; 适用领域 : 五金行业 ; 类型 : 一体式 ; 加工定制 : 否 ;